8.4″ ULTRA Resistive Sensor, 5-Wire

An ULTRA resistive touch screen sensor works in the same way as a resistive touch screen sensor. A resistive touch screen sensor is an analogue switch technology that is pressure activated. Two conductive coated layers (usually using Indium Tin Oxide [ITO]), facing each other, are separated by a layer of dielectric spacer dots. When pressure is applied to the top surface, the two layers come into contact and the controller locates the touch point. To determine the x and y coordinates, in 4- and 8-wire sensors a voltage gradient is applied to each layer in turn; and in 5-wire sensors the resistance is measured between the top layer and each of the four corners of the base layer.

For more information on popular touch screen technologies, please download our whitepaper.

ULTRA’s Glass-Film-Glass (GFG) constriction adds a borosilicate glass membrane that enhances the touch screen sensor’s operational life, reduces ITO fracturing and pillowing by creating a stiffer glass/polyester top layer. It also extends the operational temperature range with better matched coefficients of expansion. The glass/polyester top layer does not shatter, or result in spalling, and allows the sensor to continue to operate even after extreme abuse such as deep scoring, repeated impact trauma and other forms of vandalism.

A resistive touch screen sensor is an analogue switch technology that is pressure activated. Two conductive coated layers (usually using Indium Tin Oxide [ITO]), facing each other, are separated by a layer of dielectric spacer dots. When pressure is applied to the top surface, the two layers come into contact and the controller locates the touch point. To determine the x and y coordinates, in 4- and 8-wire sensors a voltage gradient is applied to each layer in turn; and in 5-wire sensors the resistance is measured between the top layer and each of the four corners of the base layer.

For more information on popular touch screen technologies, please download our whitepaper.